Paver Driveway Calculator
Project Dimensions
Paver's Dimensions
Dimensions
Driveway Area: 0.00 sq ft
Driveway Perimeter: 0.00 ft
Paver Estimate
Pavers per sq ft: 0.0
Pavers: 0.0 pieces
Estimated Material Cost
Pavers Cost: $0.00
Total installation cost: $0.00
Estimated Total Cost
$0.00
*Estimate only - costs vary by location/vendor
How the Paver Driveway Calculator Works
The Paver Driveway Calculator is a simple, yet powerful tool designed to help you estimate the amount of pavers and base materials needed for your driveway project. Whether you're planning a new driveway or replacing an existing one, this calculator provides an accurate estimate based on the specific dimensions of your project.
Key Inputs Required:
Length of the Driveway: This is the total distance you want to cover with pavers. Measure the driveway's length in feet.
Width of the Driveway: Measure how wide your driveway will be in feet. This is typically the most variable measurement, as driveways can vary in size depending on your needs.
Paver Dimensions: The size of each individual paver is essential for calculating how many pavers you will need. Measure the length, width, and thickness of the pavers you plan to use in inches or feet.
How the Calculator Works:
Using our paver calculator is quick and straightforward. Follow these steps to plan your project efficiently:
Step 1: Calculate the Patio Area
- Single Rectangle: If your patio is rectangular, simply input its length and width to calculate the total area.
- Irregular Shape: For irregular patios, divide the area into smaller rectangles and calculate each separately. Then, sum the areas to get the total. Use our Square Footage Calculator for a quick estimate.
- Tip: If the subareas vary in size, calculate them individually and sum up the results.
Step 2: Enter Paver Brick Dimensions
Input the dimensions of a single paver brick—its width and length. This will help calculate the area each paver covers. Refer to the Common Paver Sizes table below for typical dimensions.
Step 3: Get the Paver Requirements
The calculator will determine:
- Number of pavers per square foot: Based on the size of a single brick.
- Total pavers needed: The total number of pavers required to cover your patio area.
Step 4: Estimate Costs
- Paver Cost: Enter the price of a single paver to calculate the total material cost. Typical rates range between $0.35 to $0.90 per brick or $2 to $6 per square foot, depending on your location.
- Installation Cost: Add the professional installation cost per square foot. Typical rates range between $10 to $17, depending on your location.
Common Paver Sizes
| Size (in) | Size (cm) | Area (ft²) | Area (cm²) |
|---|---|---|---|
| 4 × 8 | 10 × 20 | 0.22 | 200 |
| 6 × 6 | 15 × 15 | 0.25 | 225 |
| 6 × 9 | 15 × 23 | 0.38 | 245 |
| 8 × 8 | 20 × 20 | 0.44 | 400 |
| 12 × 12 | 30 × 30 | 1.00 | 900 |
| 14 × 14 | 36 × 36 | 1.36 | 1296 |
| 12 × 18 | 30 × 46 | 1.50 | 1380 |
Additional Costs to Consider
1. Base Materials for Paver Installation
A solid base is critical for long-term durability. Most installations require:
- 4" to 6" of compacted gravel
- 1" layer of sand
2. Polymeric Sand
Used to lock pavers together and prevent weed growth between joints. A 50 lb bag typically covers 25–50 square feet.
Why Use the Paver Calculator?
Accurate Estimates: This tool helps ensure that you order the right amount of pavers and base materials, reducing the risk of over- or under-ordering.
Cost Efficiency: With accurate calculations, you can more efficiently estimate the costs for materials, labor, and any additional requirements for your project.
Convenience: By inputting simple measurements, you get an immediate estimate of the materials needed, saving you time and effort in planning your driveway project.